|
|
Build Your Online Product Catalogs?
| Product Name: |
automatic water bottling machine
|
| Supply Ability: |
|
| Related proudcts |
|
| Specifications |
all available |
| Price Term: |
fob |
| Port of loading: |
china |
| Minimum Order |
1 set |
| Unit Price: |
usd |
|
XG-100 (200Bottles/Hour) Automatic water bottling machine
This machine adopts PLC (programmed logic controlling) full automatic operation. It is suitable for 3, 4, 5, 6 gallon PC or PET bottle washing, filling and capping. For the modern water factory, it is maybe the best machine.
The processing will be below:
1. Close the air creep age switch; the lights on controlling panel will be blighting. This means the machine's power is connected and the PLC begins working.
2. Put the "optional switch" to the "auto" conduction, and push button of the switch "start-up", then the AC connector, which controls the driving amplifying, begins to connect, the machine start working.
When the empty bottles insert the position and press down the empty bottle inductor (the washing message and command will be sent out from the inductor.)
The washing amplifying starts working. The chains and the bottle tray will take the empty bottle into the washing working procedure. (Washing includes two rinsing: one is dosing water (CLO2) washing and the other is purified water washing).
For the time of the purified water washing, it is 15seconds and for the dosing water washing it is 50 seconds.
When the driver takes the empty bottles and the indicator on the chain to the orientation area, the sensor valve will send the command to stop the driver and in the same time the washing pumps will start and the washing begins (The time can be set by the PLC).
After washing, the conveyer will take the cleaned bottle to the bottle tray, and the bottle pusher will start working. It will push the bottle to the position of the filling heads, make sure the filling heads aim at the bottle correctly and fill the water into the bottle. How much the water will be filled into the bottle will depend on the PLC controlling. If you set the PLC to the default, then the filled water will exactly fulfill the 5 gallon (18.9liter) bottle.
After fulfill the bottle, PLC will send the message to stop the filling valve and the filling process finishes. |
| Company: |
SHENZHEN ANGEL EQUIPMENT & TECHNOLOGY CO., LTD.
|
| Contact: |
Mr. Michael Wen |
| Address: |
B507, Hi-tech Plaza, Tian'an Cyber Park, Chegongmiao, Shenzhen 518040, China |
| Postcode: |
518040 |
| Tel: |
86-755-83421677 |
| Fax: |
86-755-83439334 |
| E-mail: |
|
|
|
|
Home
